Skip navigation

Dr Sergio Gonzalez Sanchez

Assistant Professor

Department: Mechanical and Construction Engineering

Dr. Gonzalez is Senior Lecturer in Mechanical Engineering. He received his PhD in Materials Physics at Complutense University of Madrid and PhD research work was carried out at the National Centre for Metallurgical Research (CENIM-CSIC) in Spain.


His research is focused on metallurgy, rapid solidification and processing-structure-property relationships, he has received funding from EPSRC, Royal Society, Innovate UK, IOP, Fellowships from Spain (Juan de la Cierva and FPI to pursue his PhD), funding from Japan (internal funding from WPI), Marie Curie travel grant and SRUK Short Term Mobility Fellowship.


He is fellow member of IoM3 (FIMMM), chartered scientist, chartered engineer, full member of EPSRC peer reviewer college, Fellow of the higher education academy (FHEA), British Engineering Excellence Award Finalist and invited editorial board member of numerous journals

Sergio Gonzalez Sanchez

Campus Address

Wynne-Jones Building (room WJ202)



  • Please visit the Pure Research Information Portal for further information
  • Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties, Martinez-Garcia, A., Estrada-Guel, I., Reguera, E., Amaro-Hernandez, R., González, S., Garay-Reyes, C., Martínez-Sánchez, R. 2 Jan 2024, In: International Journal of Hydrogen Energy
  • Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte, Martinez-Garcia, A., Orozco-Carmona, V., Mendoza-Duarte, J., Juarez-Arellano, E., González, S., Ruiz-Esparza-Rodriguez, M., Estrada-Guel, I., Garay-Reyes, C., Sánchez, R. 1 Sep 2024, In: Electrochimica Acta
  • Enhancement of the Electrical Conductivity and Mechanical Properties of Al-Mg-Si and Al-Mg-Zn Ternary Systems After a T8 Heat Treatment, Atanacio-Sánchez, X., Garay-Reyes, C., Martínez-García, A., Estrada-Guel, I., Mendoza-Duarte, J., Guerrero-Seañez, P., González Sánchez, S., Rocha-Rangel, E., de Jesús Cruz-Rivera, J., Gutiérrez-Castañeda, E., Martínez-Sánchez, R. 13 Nov 2024, In: Metals
  • Enhancing wear resistance of sustainable CuZr SMA by promoting stress-induced martensitic transformation, Younes, A., Garay-Reyes, C., Martínez-Sánchez, R., González, S. 13 Aug 2024, 1st International conference on advances in novel materials, Melville, US, AIP Publishing
  • Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy, Laguna-Zubia, L., Garay-Reyes, C., Guerrero-Seañez, P., Ruiz-Esparza-Rodríguez, M., Mendoza-Duarte, J., Estrada-Guel, I., Gonzalez Sanchez, S., Martinez-Garcia, A., Martínez-Sánchez, R. 1 Apr 2024, In: Vacuum
  • Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment, García-Hernández, L., Garay-Reyes, C., Ruiz-Esparza-Rodríguez, M., García-Aguirre, K., Estrada-Guel, I., González, S., Mendoza-Duarte, J., Camarillo-Cisneros, J., Guía-Tello, J., Martinez-Garcia, A., Martínez-Sánchez, R. 21 Aug 2024, In: Canadian Metallurgical Quarterly
  • Abrasive Wear Behavior of Al–4Cu–1.5Mg–WC Composites Synthesized through Powder Metallurgy, Rodríguez-Cabriales, G., Garay-Reyes, C., Guía-Tello, J., Medrano-Prieto, H., Estrada-Guel, I., García-Hernández, L., Ruiz-Esparza-Rodríguez, M., Mendoza-Duarte, J., García-Aguirre, K., Gonzalez Sanchez, S., Martínez-Sánchez, R. 27 Feb 2023, In: Lubricants
  • A New Cooling-Rate-Dependent Machine Learning Feature for the Design of Thermally Sprayed High-Entropy Alloys, Kamnis, S., Sfikas, A., Gonzalez Sanchez, S., Karantzalis, A., Georgatis, E. 1 Mar 2023, In: Journal of Thermal Spray Technology
  • Computational and experimental investigation of the strain rate sensitivity of small punch testing of the high-entropy alloy CoCrFeMnNi, González, S., Sfikas, A., Kamnis, S., John, S., Nye, Z., Spink, M., Allen, C., Martínez-Sánchez, R., Win Naung, S., Rahmati, M., Keil, T., Durst, K., Lancaster, R. 5 Mar 2023, In: Journal of Alloys and Compounds
  • Effect of Processing Methods on The Electrical Conductivity Properties of Silver-Polyurethane Composite Films (Experimental and Numerical Studies), Mehvari, S., Goodhew, B., González Sanchez, S., Lafdi, K., Sanchez Vicente, Y. 1 Dec 2023, In: Journal of Composite Materials

  • Abdurauf Younes The role of microalloying on tuning the mechanical performance of Cu-Zr based Shape Memory Alloys Start Date: 26/02/2018 End Date: 30/09/2022
  • Victor Villapun Puzas Rapidly solidified metallic glass alloys for antibacterial touching surfaces Start Date: 01/10/2015 End Date: 07/11/2018

  • Physics PhD June 30 2008
  • Fellow (FHEA) Higher Education Academy (HEA) 2016


a sign in front of a crowd
+

Northumbria Open Days

Open Days are a great way for you to get a feel of the University, the city of Newcastle upon Tyne and the course(s) you are interested in.

Research at Northumbria
+

Research at Northumbria

Research is the life blood of a University and at Northumbria University we pride ourselves on research that makes a difference; research that has application and affects people's lives.

NU World
+

Explore NU World

Find out what life here is all about. From studying to socialising, term time to downtime, we’ve got it covered.


Latest News and Features

Members of the Common Sense Policy Group at Northumbria University have released a new report with Insights North East which presents cutting-edge evidence on regional public opinion on the future of transport policy in the North East.
All Jumbled Up Report Cover
Digital forensics
Dying mangrove trees in the Maldives
Becca French
Autumn 2024 News
More news
More events

Upcoming events

Undergraduate & Postgraduate Open Day
What is to become of us?
Interior Educators Conference 2024
-

Back to top